Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2023

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Cleaning corrosion from electrical connectors.

posted by  Lawrence on  Mon Apr 21 04:59 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Whats the best way to clean and protect the connectors. Are there any good spray on type products?

Ive always used sandpaper, emory cloth etc. Im just wondering if there is a more"high tech" solution?

Lawrence








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Cleaning corrosion from electrical connectors.

    posted by  Steve on  Mon Apr 21 05:19 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 07:16 CST 2014
    [RELATED]

    Don't use abrasives. Far better is a spray can of "DeOxIt" electrical deoxidizer and protector from Caig Labs. Use this, then protect with silicone dielectric paste on any circuit operating above about five volts (i.e., not your O2 sensor.) That's all you need.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.