Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2021 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

MORE oil leaks... 900

ok the turbo replacement continues...

the mech has 'fixed' the leak from the oil return pipe wher it goes into the sump...they had taken a chunk out of the new seal i had provided them...

but i still seem to have oil leaking - possibly from the joints in the pipes to the oil cooler (or turbo) right down by the filter...

today i de oiled the engine bay so i can have a close look tommorow...and found the TOP gasket for the oil return pipe on the chasis rail...GRRRRRRRR...

questions:-

1. is that gasket necessary
2. can it be fitted from above by feel by dropping the oil return pipe slightly
3. the oil pipe fittings which look like compression fittings, canthey be successfully tightened, or do they have some sort of gasket in there
4. anyone think of anything suitable i can do to the mechanic (slow, painfull....etc etc)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New MORE oil leaks... [900]
posted by  the kick inside  on Sat Apr 19 09:58 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.