Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2003

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Nissens Aluminum-Plastic Radiators

Has anyone had any experience with the Nissens aftermarket aluminum-plastic side tank replacement radiators? These mimic the OEM Blackstones, which are of high quality. How does Nissens compare?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Nissens Aluminum-Plastic Radiators

I have heard good things about them. My understanding is they are better than Volvo rads, and will last longer with fewer problems. not sure about cost compared to Volvo.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Nissens Aluminum-Plastic Radiators

Steve:

No long term experience with the plastic Nissens, but there's one in my daughter's '94 944T right now. Initial build quality seemed high. Been in there over a year with no problems. A/C always on down here and lots of stop and go driving. Seems to do fine.
--
Mike W., '79 242GT (my project car), '85 245DL (son's project car), '87 245 DL (my daily driver), '90 244DL (son-in-law's daily driver), '91 744T (wife's daily driver), '94 944T (daughter's daily driver), Largo, FL







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.