Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2006 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater Question 120-130

And now for something completely different...anyone know how the plastic heater vent which goes from the front heat outlet to the rear seats is removed? I see one screw towards the rear and no others...








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Heater Question 120-130

    That one little screw is it.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Heater Question 120-130

      Really? I took the screw out but I can't budge the thing. It feels like it's really anchored down...








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Heater Question 120-130

        The duct gets "glued" to the transmission hump because of the sound insulation they stick down first. Just take out the screw and then gently and firmly lift the duct starting at the back and working forward. When it finally comes off, you'll have to disengage it from the rubber connector which links the duct with the heater box.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.