Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2010 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Seat Fitament?? 200

Anybody know offhand what years of seats will fit in a '84 245?
THANKS!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Seat Fitament?? 200

All 240 seats will mount to the floors. There is a design change in the seat between 1985 and 1986. Headrests, upholstery is different. No change to the track mounts though. 4 13mm nuts to remove a seat. If they've never been out before, the rear ones are covered with a plastic cover and rivet.
One note- you can add height adjustment to a passenger seat if you use the appropriate pieces of a driver's seat under a passenger seat. YOu need to mount the intermediate section to the passenger seat rails and seat bottom. With both out you'll see what to take apart. CAreful with the little black oval guides- they can be a bit fragile.
--
Rob Bareiss, New London CT ::: "Roterande Fläkt Och Drivremmar!"








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Seat Fitament?? 200

Thanks Rob! Good idea about the passenger seat...







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.