Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

torque specs for engine components 900

posted by  someone claiming to be gil on  Wed Mar 26 12:36 CST 2003 [RELATED]

I was wondering if anyone has the torque specs for the exhaust manifold, intake manifold nuts. also the cam, intermidiate, and crank pulley bolts. I would appreciate the info. it's a 93 940 NA by the way
Thanks,
Gil Milone








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

torque specs for engine components 900

posted by  Jerry Warren on  Thu Mar 27 16:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 2 17:06 CST 2008
[RELATED]

Took awhile to find everything. The intake manifold(new gasket)bolts 15 ft-lbs.
Exhaust manifold(new gasket) bolts 10-20ft-lbs. The cam gear and itermediate gear bolts 35 ft-lbs. The crank pulley bolt is 45 ft-lbs plus angle tighten 60 degrees(one flat of the bolt).








  REPLY TO THIS MESSAGE    PRINT   SAVE 

torque specs for engine components 900

posted by  someone claiming to be Gil on  Fri Mar 28 01:11 CST 2003 [RELATED]

Jerry Thank you so much for the reply. I'm repairing my 93 940 (previous owner overheated it). I looked in my 240 green manual and those specs where there, but I didn't know if they had changed since the 240. Thanks again
-Gil






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.