Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2024 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Sway Bar Poly Bushing -- Sources? 700 1989

It'll take me a lifetime to find the answer on the "search" feature......

So I'll just ask if anyone had a source for poly sway bar bushings -- the ones which mount into ROUND bottom brackets onto the frame.


(The round brackets are the originals. These are not the SQUARED off bottoms which are the updated brackets.)
--
1989 740Ti 1986 240DL 1984 244GL








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Sway Bar Poly Bushing -- Sources? 700 1989

    last year i orderd the swaybars from ipd they also came with new polly bushings once we got them on .... oooh man it tightend up the ride so much.
    and heres a tip when you put in the new bushings make sure you grease them up realy well with marine grese because it is made to stay on there even when it gets wet. if you dont the bushings will skweek... really bad

    jp
    86, 764ti 143K








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Sway Bar Poly Bushing -- Sources? 700 1989

    you might be able to pick some up at your local autozone, I believe they carry and/or can get "energy suspension" poly bushings for pretty much any application, but you will probably need to know the size on them.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.