Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2014

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 DL

posted by  strong on  Sun Mar 16 13:55 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Where would the crank sensor be located. "240 DL " plugs are wet, and have fire, but engine just turns and turns.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    240 DL 200

    posted by  Aye Roll on  Sun Mar 16 17:23 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Tue Oct 14 21:08 CST 2014
    [RELATED]

    Need to know what year it is.
    Up to 1988, with CIS/ LH2.0/ LH2.2 fuel injection, it's in the distributor and it's a hall-effect sensor.
    From 89-on with LH 2.4, it's behind the head, on top of the bell housing, crank sensing.
    Either way, if the plugs are firing, it's doing its job.
    --
    Rob Bareiss, New London CT ::: "Roterande Fläkt Och Drivremmar!"







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.