Volvo RWD 140-160 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 5/2008 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

fuel line hose? 140-160

posted by  greenteagod on  Mon Feb 17 22:48 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 17:16 CST 2008
[RELATED]

1973 B20F in a 145
does anyone know the diameters of hose?
I know the one going in is larger diameter and low pressure
the one going out is smaller and high pressure.
I was just wondering if anyone knew the dimensions
thanks.
--
1973 145 Lola








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

fuel line hose? 140-160

posted by  walrus3 on  Tue Feb 18 02:13 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

I think they are mostly 5/16" and 3/8".
The one coming out of the regulator is the only one that should be
low pressure because all the rest operate at 28 psi (assuming the regulator
is working, the bypass is not clogged and the regulator is properly adjusted.)
The size should be marked on the outside of the hose, in long enough runs
that you can read it.
--
George Downs, The "original" Walrus3, Bartlesville, Oklahoma







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.