Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 6/2005 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

M46 questions 700

posted by  EgS60racer on  Sun Feb 16 11:46 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I need some dimensions from a 7 series people with m46's. You may have noticed that I'm working with John Parker on T5 adapters for 240's.

So heres what I need to know:
Are the bellhousing between the 7 and 2 series the same.
If so, then it's safe to assume the input shafts are the same length and pilot bearings

So, how do they get differen't shifter positions. It would be safe to assume that this is made up with different lengths in the linkage. So, could someone please give me an dimension from the back of the bellhousing to the where the shifter would sit in neutral (doesn't have to be exact). This would let us come up with a solution for 7 you series owners.

Thanks guys!

Doug
--
Sacramento VCOA President, (sacvolvo@hotmail.com) Admin @ clubvolvo.com 2001 S60 2.4t w/17' Amalthea & Premium package 82 242t 5spd (Offical Project Car!) w/ With more parts than I can list, 85 244ti~ Parts car








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    M46 questions 700

    posted by  john sargent on  Sun Feb 16 12:24 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 09:07 CST 2014
    [RELATED]

    The bell housings are the same as are the input shafts and pilot bearings. It is 24.5" from the rear of the bell housing to the center of the shift linkage pivot.

    I have an M46 which was originally in a 240 in my wife's 745T. I had to change the shift linkage, throwout arm and ball stud, and output flange for the swap.

    What T5 ratios are available? Please keep me posted.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      M46 questions 700

      posted by  EgS60racer on  Sun Feb 16 13:08 CST 2003
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

      Thank you John, thats the EXACT info I needed!

      Heres a link to T5 info. http://www.moderndriveline.com/Technical_Bits/t5_history.htm

      What were looking for is World Class 5.0l motored T5's. The 10 spline units have clutch discs that fit the volvo pressure plate.

      If your intrested in one, even if not this moment, please contact John at v-performance.com The more of us that are intrested the more likely he can do them, and cheap! :D

      Doug
      --
      Sacramento VCOA President, (sacvolvo@hotmail.com) Admin @ clubvolvo.com 2001 S60 2.4t w/17' Amalthea & Premium package 82 242t 5spd (Offical Project Car!) w/ With more parts than I can list, 85 244ti~ Parts car








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        M46 questions 700

        posted by  badge988 on  Sun Feb 16 22:32 CST 2003
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

        I guess my question for this one is will a custom clutch disk be available or is the spline count the same between the T-5 (V8) and the sachs disk used by Volvo?
        Another question would be the reliability of the warner T5 vs the volvo M46. I remember many a problem with the T5's, syncro problems, bearings and broken shift forks, I have yet to see a M46 break from even severe abuse such as power shifts on a B28 running redline. Not saying the T5 idea is bad however if I was in a position of transmission selection everything being equal with mounting I would choose te M46. Got any adapters to fit an M46 to an oldsmobile 350 by chance?


        Badge988








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          M46 questions 700

          posted by  EgS60racer on  Tue Feb 18 04:33 CST 2003
          Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

          Badge, you have to be kidding right? I've destroyed one beind a stock 82 non IC'd 242ti, and have a buddy who has destroyed ( I mean killed ) 3 of them in 2 years. The m46's are terrible. The T5's are much stronger stock, and have a huge aftermarket for parts.

          As for the t56, they require quite a bit more work, including cuting the floorboard to make it fit and other items. As for the adapter fitting it though, I can find out!

          Doug Kauer
          --
          Sacramento VCOA President, (sacvolvo@hotmail.com) Admin @ clubvolvo.com 2001 S60 2.4t w/17' Amalthea & Premium package 82 242t 5spd (Offical Project Car!) w/ With more parts than I can list, 85 244ti~ Parts car








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          M46 questions 700

          posted by  Cliff8928 on  Mon Feb 17 16:25 CST 2003
          Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

          How about the chance of installing a T-56 into a brick???


          Cliff Scott <-likes six-speeds
          89 DOHC 740








          •   REPLY TO THIS MESSAGE    PRINT   SAVE 

            M46 questions 700

            posted by  EgS60racer on  Tue Feb 18 04:36 CST 2003
            Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

            Oh, I forgot to mention. Centerforce makes a clutch disc for the 10 spline T5 that is the same size as the volvo disc. So I'm hoping you can use the volvo pressure plate and the Ford disc.

            Doug
            --
            Sacramento VCOA President, (sacvolvo@hotmail.com) Admin @ clubvolvo.com 2001 S60 2.4t w/17' Amalthea & Premium package 82 242t 5spd (Offical Project Car!) w/ With more parts than I can list, 85 244ti~ Parts car








            •   REPLY TO THIS MESSAGE    PRINT   SAVE 

              M46 questions 700

              posted by  Cliff8928 on  Tue Feb 18 16:56 CST 2003
              Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

              humm.. centerforce is garbage IMHO... I had one on my othe rcar and it would make a nice stock replacement... for something better check out www.clutchmasters.com I have their stage 3 clutch in my other car..

              Cliff Scott
              89 DOHC 740








              •   REPLY TO THIS MESSAGE    PRINT   SAVE 

                M46 questions 700

                posted by  EgS60racer on  Tue Feb 18 18:00 CST 2003
                Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

                Ahh, clutchmasters I have given them some serious thought. I'm thinking the T5 will need some serious smack down!

                Doug
                --
                Sacramento VCOA President, (sacvolvo@hotmail.com) Admin @ clubvolvo.com 2001 S60 2.4t w/17' Amalthea & Premium package 82 242t 5spd (Offical Project Car!) w/ With more parts than I can list, 85 244ti~ Parts car







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.