Volvo RWD 444-544 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 9/2002 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Torques for B16B cylinderhead 444-544

posted by  someone claiming to be Ola on  Wed Jan 29 06:46 CST 2003 [RELATED]

I need to know the right torque for the cylinderhead bolts of a B16B (have only got for B18). Is the torque different for B16A and B16B?

What about the procedure; should I tighten once and for all to the right torque or should I retighten after a while or several times?

Would also be good to have the order to tight the bolts, if anyone could post the scanned page on the bb or mail it to me at ola.ora@hcafrica.com it would be just great!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Torques for B16B cylinderhead 444-544

posted by  ima544 on  Wed Jan 29 18:11 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 17 14:29 CST 2007
[RELATED]

There is no difference between the A&B.
Lb.ft. 50-60
Kgm. 7-8
I would tighten to the max and leave it.
I can't help with the scan. If you have the B18 information the torque order would be the same.
Jim







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.