Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2010 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need to replace Brake booster 200 1984

My 242 Turbo brake booster needs to be replaced. Just wondering if all 200's brake booster are the same and where is the best place to buy this thing.

Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need to replace Brake booster 200 1984

Cliff,
I have one out of an '83 GL if you need it.
--
philvo








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need to replace Brake booster 200 1984

Cliff,
I hane one out of an '83 GL if you need it.
--
philvo








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need to replace Brake booster 200 1984

There were 2. They are refered to in the parts catalogue as 2x8, or 10". 1 is larger in diameter and short from front to back. The other is smaller in diameter and longer from front to back. The 10" was used primarily in the 70's. Any pick and pull should suffice. I have not seen the 10 used on anything after about 79 or 80. If you can find a later model 240, grab it. Not sure if ABS cars had a different booster or not. When shopping in the yard, just look for 1 the same size as yours. You can't miss the differences.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Need to replace Brake booster 200 1984

Thanks bob







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.