Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2018 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

*242 Bumper Help!* 200 1983

ok i bought this 83 242 a year ago its a halifax car if that helps but the problem is that i was looking at my bumper and both the front and rear are thicker at one side than the other. I though maybe it had been in a crash and the body was twisted(hopfully not) but then at a volvo show i went to there was a car like mine with the same bumper problem. what is wrong with my bumper? how can i fix it? is there somthing in side the bumper that could have collapsed at one side?? Thanks, Jon








  REPLY TO THIS MESSAGE    PRINT   SAVE 

*242 Bumper Help!* 200 1983

Hi Jon

My car had a similar problem. In my case, it was the bolt which holds the corners to the fenders was broken. Does one side of your bumper look much thicker or just a little off? Another possibility is that the plastic cap's tabs which snap it into place on the aluminum inner structure may have popped loose on that thicker side. Worst case senario: it may have taken a mild hit which could have bent the underside of the aluminum understructure up.

Hope this helps
Richard







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.