Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

where are the serviceing ports for the AC 200 1990

posted by  someone claiming to be uniballer63 on  Sat Mar 30 09:43 CST 2002 [RELATED]

wheres the port where I put hte r134a into?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

where are the serviceing ports for the AC 200 1990

posted by  rhaire on  Sat Mar 30 10:02 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 4 10:16 CST 2014
[RELATED]

If your system has been converted the ports on the back of the compressor will have the 134A fittings. Low pressure is "S" and on the drivers side. If the conversion was really well done there might be a hose fitting or perhaps a fitting at tehj drier, but you have to be lucky to have one of those. It would have a blue cap for low pressure. If the system has not been converted, you have to buy the fittings that go onto the R12 fittings and take the R134A gauges and can fittings.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.