Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

how to put in volt, oil pressure and oil temp gauges 200

posted by  someone claiming to be andoy on  Thu Feb 28 06:52 CST 2002 [RELATED]

howdy all,

I have an 86 240 sedan. oil pressure, volt and oil temp are all idiot lights. I want real gauges. I have the gauges and I think I know where the sensors are, but I dont know how to wire. can someone guide me step by step. I really mean step by step, where what wire goes and what each wire is for behind the guages. I got the gauges from a working turbo. I removed the turbo gauge since I dont have a turbo and I put in an oil temp gauge which I also found.

I replaced my engine wiring harness by myself without taking intake manifold off and it took me only 1.75 hours. and two beers. yup 1.75 hours. even changed teh injector seals. even re-routed the alternator wires.

thanks in advance. you can also p-mail me directly at casinocyberlaw@earthlink.net

andrew






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New how to put in volt, oil pressure and oil temp gauges [200]
posted by  someone claiming to be andoy  on Thu Feb 28 06:52 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.