Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

SPACER 200 1985

posted by  someone claiming to be Junior Baptiste on  Sat Dec 9 06:28 CST 2000 [RELATED]

I WILL BE MAKING SOME SPACERS FOR MY 240 TURBO, AND I HAVE ONE QUESTION. WHICH TYPE WORKS BETTER. THE ONE WHICH REQUIRES NEW STUDS TO BE PRESSED INTO THEM, OR THE OTHER TYPE. ANY HELP WOULD BE GREATLY APPRECIATED. QUESTION 2, DOES ANYONE WANT TO PART WITH A SET OF 850R POLARIS 17 INCHERS?

JUNIOR







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Re: SPACER 200 1985

    posted by  someone claiming to be Michael on  Sat Dec 9 07:29 CST 2000 [RELATED]

    The spacer with it's own studs should be better because it wouldn't require longer wheel studs, which is kind of expensive to do. Also, if you happen to have snow tires on RWD wheels, they could be mounted on the stock wheel studs, and the studs wouldn't be sticking way out of the wheel, looking to be damaged.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.