Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 9/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Removal of back (second) seat back (vertical) 200 86

posted by  someone claiming to be Tom on  Fri Dec 8 08:47 CST 2000 [RELATED]

I would like to replace the vertical half of the back seat (second seat). It feels as if it should pull up to remove but there is a spring lock (or something) stopping it.

Looking for advice or instructions to remove.

Thank you.

Tom







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Removal of back (second) seat back (vertical) 200 86

posted by  someone claiming to be Randy Starkie on  Sat Dec 9 00:27 CST 2000 [RELATED]

Tom,

I assume you are talking about a wagon. The pivot point on the seat back is spring loaded. Push the seat all the way to one side and get a thin high quality screwdrive in the space between the bracket and the side of the pin. Pry back on the surface of the pin until it exits the hole. Remove seat.

Randy






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.