Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2007 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B21-F engine goes out of time 200 82

posted by  someone claiming to be Keith Shostrom on  Fri Oct 19 14:10 CST 2001 [RELATED]

Thanks to Don for his info.

The mechanic did say that the bearing surface on the center bearing showed some galling. What do you think? Thanks again.







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: B21-F engine goes out of time 200 82

    posted by  someone claiming to be Don Foster on  Sat Oct 20 00:41 CST 2001 [RELATED]

    "...mechanic did say that the bearing surface on the center bearing showed some galling. What do you think?"

    I think I should never say "never," but a seizing I-shaft would be a mighty rare thing. I've never heard of it happening and can't imagine why it would. The I-shaft conditions are FAR different from the camshaft conditions.

    However, if the shaft did seize I would expect it to either snap the belt or strip off a couple of teeth from the belt.

    Does the cam ever jump timing or is it only the distributor?






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.