Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Back in Black (a Spay Paint Testimonial) 200 89

Just wanted to let anyone out there considering painting, that about 2 months ago I used "plasti-kote ENGINE ENAMLE," low-gloss black No. 215 on the roof rack of my 245. I bought it at Pep Boys for $4/can. The original finish had weathered and chalked considerably probably because of years of intense sunlight and heat. The paint did a great job and makes the roof rack look brand new. It is very durable as well.

Couple of tips:

1) Clean roof rack the night before with Comet (don't remove the original paint) and dry well

2) Use 3 light coats

3) Wait 1 day to reinstall

4) Purchase a couple of new mount bushings (several of mine were deformed)

I am tempted to use this on the black grid of the grill. Does anyone have any succes out there with painting plastic (eg., mirror housings, bumbers and the plastic molding between the rear bumper and the back wheel?








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    a Spay Paint Testimonial 200 89

    How about giving us a report after a couple years' exposure

    to the sun?

    BTW do you suppose spay paint will work on female dogs and cats?








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Are you saying... 200 89

      ...this could be a testicle moanial for this product???








      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        Re: Are you saying... 200 89

        You can interpret it any way you see fit!








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: Back in Black (a Spay Paint Testimonial) 200 89

    I used Dupicolor Rubberized bumper coating on my aridam, wiper arms, and body moulding worked real well, just remember to clean and mask with care







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.