Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2018 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

problems removing flame trap 900 1995

posted by  someone claiming to be john baldinger on  Mon Apr 16 10:32 CST 2001 [RELATED]

tried to remove flame trap hoses on my 1995 940 wagon. Lifted 5 inch hose from breather box ok,but couldnt disconnect the small hose from... the trap assembly..Would be easier to remove threaded fitting that small hose is connected to on the intake manifold. That will allow me to get the housing out from that tight piece of real estate where the damn thing is stashed..... Under fuel rail and adjacent to injector wires. Is this ok or ill adised to disconnect the coupling at the intake mainfold.. See no other way to work in the closed space. Should I have a new plastic trap housing ready to go also??? It appears the larger upper hose is on real tight and may crack the housing... Should I just replace the housing ,hoses and the whole shebang at 60000 miles..No problems with system..just never been cleaned or replaced..Car has had mobil 1 changed every 5k..THANKS JOHN





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New problems removing flame trap [900][1995]
posted by  someone claiming to be john baldinger  on Mon Apr 16 10:32 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.