Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil Pressure Sender??? 200 86

I have a Volvo(VDO) 5-bar oil pressure sensor gauge and was wondering what specific type of sending unit I need and some of the places where I may be able to purchase it.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: Oil Pressure Sender??? 200 86

    Rusty at RPR has it listed in his catalog....








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Re: Oil Pressure Sender??? 200 86

      Whewn yo uget one you will need the angle adapter or the sender will hit the alternator. It looks like a 45 degree, 1/8 inch pipe thread, street elbow.

      Bill D.








      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        Re: Oil Pressure Sender??? 200 86

        Actually I didn't find that angle adapter very usefull. I got the proper Volvo/ VDO sender kit from the dealar. The angle adapter is in my box of volvo spare parts. It made the space problem worse. The sender will fit in with just the thread adapter. It makes changing the alternator belts more difficult, but not impossible







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.