Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Removal of Auto Shift Knob 200 1988

posted by  someone claiming to be Greg on  Thu Nov 30 08:18 CST 2000 [RELATED]

I'll be replacing the shifter cover on my '88 240, and will therefore need to remove the shift knob. I can find no obvious way that the knob or shift lever comes apart. Has anyone done this?

Thanks in advance.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Removal of Auto Shift Knob 200 1988

posted by  someone claiming to be rhaire on  Thu Nov 30 11:58 CST 2000 [RELATED]

Look at the seam in the back of the chrome shaft and separate and remove it carefully. Now, put a baggy over the knob to contain flying parts. Put a crescent wrench under the knob and pound up, tapping it with a hammer. The knob will pop off.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Removal of Auto Shift Knob 200 1988

posted by  someone claiming to be Greg on  Sun Dec 3 09:57 CST 2000 [RELATED]

Worked perfectly. Had the job done in about 15 minutes.

Thanks.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.