Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 11/2000 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Window regulator interchange 700 1990

I would like to replace the regulator in the driver's door of my 1990 740. The local pick and pull has several earlier body style 740's. Will the regulators interchange? Thanks.

Randy








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: Window regulator interchange 700 1990

    I replaced my '91 745 drivers window regulator with a recycled part & its been working just fine for the last 2 years. If you need a Volvo recycler that has excellent service call 800-752-0146 (billy) B&D auto salvage has always had everything needed & reasonable prices.

    The regulator will need to be removed & matched to the junkyard replacement.(if your pulling it yourself) The mount patterns are not all the same. If the new one has rivets but the patern is identical it will work.

    I saved alot of money doing it all myself with used part / get new door trim attachment plugs for the door trim panel.









  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: Window regulator interchange 700 1990

    Randy,

    Have to same problem with my '90 744 16valve. Don't by used or you will have problem again soon. By IPD regulator. I bought one and installed it. Works great!! Brad Smith - - York PA







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.