Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Experiences replacing alternator bearings (or having a shop do it) 200 1984

posted by  someone claiming to be Michael Hale on  Fri Nov 10 10:38 CST 2000 [RELATED]

I just dropped in a new brush pack/regulator unit into my alternator (the original alternator). This is the second replacement brush pack in 243500. At any rate, the alternator now has excellent output, but I noticed when replacing the regulator unit that the bearings should probably be replaced sometime soon...they feel slightly loose, but spin freely without binding. Do any of you all have any experience in either replacing the bearings in the alternator yourself or having an auto electric shop do it. I'd rather replace bearings in this than go to the expense of buying a new (factory rebuilt) alternator ($$$), especially since this alternator's output is perfect. Thanks for the suggestions...

Mike Hale

84 240 243500mi





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Experiences replacing alternator bearings (or having a shop do it) [200][1984]
posted by  someone claiming to be Michael Hale  on Fri Nov 10 10:38 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.