Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2024 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 turbo transmission installed in 940 non-turbo 900

I have a '93 940 non-turbo with 300K+ miles. The transmission went out, and I replaced it with one from a '94 940 turbo. I replaced the transmission and the torque converter with the set from the donor 940. I also cleaned the filter and replaced all of the fluid with new fluid.

My 940 now has to reach higher RPMs before it will change to the next higher gear. It's fairly consistent in all gears. All gears work fine including OD, and the kickdown works fine. I've loosened the kickdown cable as much as possible, but the transmission still requires higher RPMs before it will change gears. I'm wondering if this is expected when a transmission from a turbo is installed in a non-turbo. I've double checked the fluid and it looks good. Thoughts?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 940 turbo transmission installed in 940 non-turbo [900]
posted by  chrisbradberry  on Mon May 6 19:13 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.