Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2022 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

How do I unplug my ECU without damaging the pins? 200

How do I unplug my ECU? I just found here that there is a release mechanism?
I want to be very careful not to bend any of the connections when I pull. A photograph/video would be extra helpful. Thank you. /K








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    How do I unplug my ECU without damaging the pins? 200

    Hi Kevin,

    What's wrong that you want to disconnect the ECU?
    What year 240?

    I have a Volvo book for Jetronic 2.0 1983- that shows pressing a latch
    to remove the connector. They say make sure that ignition is off.
    The newer ones have a lever on the side.
    Best to disconnect the battery for 10 minutes to be safe.
    Whats your email? I'll send the book it has some ECU connector info.
    It has trouble shooting and fault tracing that you should do before messing with the ECU.

    You should hunt around for the Volvo greenbook wiring diagram for your model year.
    It's your best system/wiring troubleshooting friend.
    If you get lucky someone may have a valid link to find it on the web.
    A hard copy is better, keep looking at Ebay, they come and go every day.

    Bill







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.