Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2007 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel Hose 120-130

Has anybody used Gates Barricade fuel hose for the hose between fuel pump and carbs? Napa has a 1/4" ID that will be equivalent to the 6mm needed.

I live in a small town and there aren't a lot of options.








  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    What size and brand clamp for this 3/16" hose?



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





    •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

      We prefer what are called "fuel injection" hose clamps as they don't easily damage the outer barrier of the fuel hose.

      I can't remember the size, but I think #10 for the 3/16" fuel hose and #13 for the 1/4" hose.

      You can use "Ideal" style hose clamps, but it's easy to over tighten the Ideal clamps which can damage the outer barrier of the fuel hose.
      --
      Eric
      Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
      Torrance, CA 90502
      hiperformanceautoservice.com or oldvolvosonly.com



      Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    Which carb(s)?
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502
    hiperformanceautoservice.com or oldvolvosonly.com



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





    •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

      SU's



      Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





      •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

        The correct sized fuel hose from the fuel pump to the carbs and in between the 2 float bowls is actually 3/16".
        --
        Eric
        Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
        Torrance, CA 90502
        hiperformanceautoservice.com or oldvolvosonly.com



        Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





        •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

          OK, thanks. I can't get anything better than Gates Barricade around here.



          Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





          •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

            We stopped using Gates fuel hose almost 15 years ago because we started seeing the outside rubber barrier splitting down to the core. The hoses didn't leak, but you could see the outside of the inner core through the cracks. This might be due to the use of alcohol in the fuel.

            We were using "regular" Gates fuel hose.

            We switched to Goodyear hose which is now called Continental.


            --
            Eric
            Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
            Torrance, CA 90502
            hiperformanceautoservice.com or oldvolvosonly.com



            Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.




<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.