Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

EGR Intake Port Blocking Plate? 200 1991

uid 46171's pic
posted by  kittysgreyvolvo on  Mon Jun 20 14:54 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 15:23 CST 2014
[RELATED]

On LH-Jetronic B230, would anyone know of an EGR blocking plate available.

Else, use the existing machine screws. Gasket or gasket maker, some washers to support the gasket.

I have the EGR plug bolt and copper washer threads dressed in nickel anti-seize.

Tanx.

Here:


--
Woo.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New EGR Intake Port Blocking Plate? [200][1991]
posted by  kittysgreyvolvo subscriber  on Mon Jun 20 14:54 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.