Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2014 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Turbo Nuts Question 900

posted by  BrickDad on  Tue May 10 09:59 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:17 CST 2014
[RELATED]

Somehow the 92 945T lost two of three of the nuts on the turbo to downpipe connection. Are these the same ones used on the exhaust manifold? Should they be copper or another material?


Brian Mee
Manassas VA








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Turbo Nuts Question 900

    posted by  planetman on  Wed May 11 11:29 CST 2022
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:29 CST 2014
    [RELATED]

    The same thread yes, the same nut, no.

    Volvo used special studs and nuts that can tolerate the extreme heat from a turbo.

    We usually have the turbo studs and nuts in stock.
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502
    hiperformanceautoservice.com or oldvolvosonly.com








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Turbo Nuts Question 900

      posted by  planetman on  Thu May 12 11:11 CST 2022
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 09:29 CST 2014
      [RELATED]

      Hello Brian,

      Can you please contact me via my website using the link below?

      Contact

      Thank you,
      --
      Eric
      Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
      Torrance, CA 90502
      hiperformanceautoservice.com or oldvolvosonly.com








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Turbo Nuts Question 900

        posted by  Townshend Act on  Fri May 13 19:04 CST 2022
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Tue Oct 7 22:44 CST 2014
        [RELATED]

        Hi Eric.
        I can't navigate your website at all. I need three (3) of the turbo-to-downpipe nuts. My manifold is 3514440, for a '94 940 B230FT.
        How do I obtain some?
        John








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Turbo Nuts Question 900

          posted by  planetman on  Fri May 13 20:56 CST 2022
          Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
          last visit: Fri Oct 24 09:29 CST 2014
          [RELATED]

          I don't have the turbo nuts on the website as it's more geared towards the pre-1976 Volvos.

          Please use the contact link at my website which is located near the bottom right hand side of home page or copy and paste the link below to send me an email.

          http://hiperformanceautoservice.com/contact_us.php

          Although I haven't tried lately, I've had trouble with the Brickboard email system in the past.
          --
          Eric
          Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
          Torrance, CA 90502
          hiperformanceautoservice.com or oldvolvosonly.com







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.