Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CRANK POSITION SENSOR 200 1993

posted by  chudar on  Sat Jan 29 11:57 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 13 20:29 CST 2014
[RELATED]

Good day all, have a crank, no start condition. Installed a new CPS by Walker. Did a resistance test on the pins, got infinity on pins 1 and 3 to ground. Checked the original CPS that I removed, got 180 ohms on pin 1 to ground. Should I get 180 ohms on pin 3 to ground? Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New CRANK POSITION SENSOR [200][1993]
posted by  chudar  on Sat Jan 29 11:57 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.