Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2021 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Code 3-1-1 signal missing from speedometer 900

posted by  muskox37 on  Mon Aug 30 17:07 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 11:54 CST 2014
[RELATED]

I am probably not doing this right but I am getting a 'check engine' light so I placed the OBD1 cable into socket 2, turned on the ignition, pressed the button once, thereby selecting mode 1 and I got a 3-1-1 code.

I pressed the button one more time and got the same code.

The interpretation table says that a signal is missing from the speedometer and that the speedometer wiring or the instrument cluster wiring is faulty and that it can cause idling problems.

The speedometer has been working fine--just reads a little high and the car seems to idle properly. I hesitate to get into the wiring. Lately the cruise control has not been working so well but otherwise can't see any problems.

Has anybody else experienced this?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Code 3-1-1 signal missing from speedometer [900]
posted by  muskox37  on Mon Aug 30 17:07 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.