Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2013

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Plastic parts

posted by  Brick Skinner on  Sun Aug 22 14:25 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 13 13:31 CST 2014
[RELATED]

Plastic parts are hard to find and typically very expensive when you do. Is there an internet resource for 3D printed parts and .stl files for Volvo?
--
signature








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Plastic parts

    posted by  planetman on  Mon Aug 23 11:49 CST 2021
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:29 CST 2014
    [RELATED]

    Hello,

    My brother has sent several parts to a person on Turbobricks.com to be 3D printed.

    We've had made a couple of NLA parts like a seat belt hook for the 1800S and the top section of a 2 piece insulation box that houses an electrical junction block for 140, 164 and early 240 Volvos.

    This person doesn't have a 3D scanner and has to measure to create the file for his 3D printer, but the above mentioned parts were small and don't have any complex shapes.

    What I haven't found yet is someone with a 3D scanner so more complex items could be accurately copied and then 3D printed.


    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502
    hiperformanceautoservice.com or oldvolvosonly.com







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.