Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Heater control valve Screw adjustment... 200 1991

uid 33936's pic
posted by  TheBrickTank on  Mon Aug 3 13:06 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

All,

I've just recently replaced my internally leaking original to the car heater control valve.

I installed the new one, made by MTC I think, and well I'm not impressed, especially for what I paid for it.

I tested it before putting it in and it did completely shut off, however once in the car, and still completely shut off, I'm still getting warm air coming out of the vents. Not a fan of this especially since I have zero a/c currently in the car.

What I want to know is how much do I have to adjust the adjusting screw for the feedback loop to shut the flow of water completely off, and if anyone knows or understands how this whole thing really works, I'd really like to know.

Thanks in advance,

Matt
--
1989 - 245, 1990 - 245, 1991 - 245, and 1993 - 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Heater control valve Screw adjustment... [200][1991]
posted by  TheBrickTank  on Mon Aug 3 13:06 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.