Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2006 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

J-type Overdrive not engaging 120-130

posted by  DBS on  Fri Nov 29 19:40 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 19:33 CST 2014
[RELATED]

Hello all:

I tried roaming all the postings here hoping to find something that troubleshoots the problem I am having with the recently installed J-type M1 into my 122.

No luck, so I am going ahead and ask for help.

The J-type M41 I acquired is a rebuilt one, but after I had it installed, it will not respond whenever I tried flipping the switch while I test drove it at cruising speed. However, when I turned off the switch, the car bucked for a split second almost as if the overdrive was being engaged, but the engine RPM remained the same.

I tried flipping the switches several more times. Same result: nothing happens with the switch turned on, but bucked every time I flipped the switch off.

I found it really strange, but I am hoping that this symptom may be something one of you or more recognize and hopefully could offer a remedy.

Many thanks in advance!

-DS





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New J-type Overdrive not engaging [120-130]
posted by  DBS  on Fri Nov 29 19:40 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.