Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

rear seat cushion removal 900 1994

posted by  muskox37 on  Sun Nov 3 08:28 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 11:54 CST 2014
[RELATED]

To remove the rear seat cushion on my 960 I found it was better to pull up on the rear of the seat [it is not attached to anything].

When it is clear of the seat back you can then lift it up high enough that you can see the connectors.

The front of the seat is connected to the car floor by two clips that grip rods that are attached to the seat frame. These clips are all that connect the seat to the floor.

The clips are floor mounted and face towards the rear of the car.

The seat has to be pushed down and rearward to get it clear of the clip.

I will attempt to show the clips and the connecting frames with some pictures.

This is the layout on a 1994 Volvo 960.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rear seat cushion removal [900][1994]
posted by  muskox37  on Sun Nov 3 08:28 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.