Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2021 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'90 745 No Start 700

posted by  gregorythomas on  Tue Aug 6 14:01 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 16 16:14 CST 2014
[RELATED]

Hi Brickboard
I removed the fuel sender assembly from the tank to replace the pump. How do i remove the pump from the assembly? I read Art's description but cant figure out how to release the pump from the fixture, what spring do i need to release? Seems like it should be obvious but I'm not getting it.
Would someone point me in the right direction? thanks Greg







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    '90 745 No Start 700

    posted by  gregorythomas on  Tue Aug 6 16:16 CST 2019
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sun Feb 16 16:14 CST 2014
    [RELATED]

    I spent more time looking at the fixture and figured out that Art was saying release the metal bar that goes to the bottom of the pump intake end of the fixture. I pried the plastic tab away from the pump and that let the metal bar slide up allowing the pump to be removed.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.