Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

DC 12V Engine Push Start Button RFID Lock Ignition for the 240 Volvo

Could one of these work in our aging 240's?
Thanks
Dan








  REPLY TO THIS MESSAGE    PRINT   SAVE 

DC 12V Engine Push Start Button RFID Lock Ignition for the 240 Volvo 200 1981

I don't have detail knowledge of the technology but I would think the hardware would have to be integrated into the existing black boxes. Any seperate add-on hardware could be easily by-passed.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

DC 12V Engine Push Start Button RFID Lock Ignition for the 240 Volvo 200 1981

My key won't go into the ignition and I'm looking for a way not to take the steering column out to replace the key core with another 26 year old worn out part!

Thanks
Dan








  REPLY TO THIS MESSAGE    PRINT   SAVE 

DC 12V Engine Push Start Button RFID Lock Ignition for the 240 Volvo 200 1981

It shouldn't be difficult to isolate the + wire to the ignition switch through a hidden on/off switch. I'd use a push button switch made for "marine" use for the starter solenoid. -- Dave







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.