Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2021 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

B230 Aftermarket Head Gasket, Elring or Victor Reinz? 900 1993

I see FCP is back ordered on Genuine Volvo Head Gaskets and EEuro want $71.67 for them.
So, I guess I will go with a head gasket from Elring or Victor Reinz. Does anyone have thoughts on which one is better? The price is about the same.
I am amazed once again at the beautiful cylinder condition on this B230 NA engine with 235K miles on it. There is virtually no ridge on the cylinders. It has had Mobil 1 oil for the last 137K miles which may have helped keep them in good condition but it may just be the great design of the engine.
--
Mine:3-940s running, 1-740, 2-940 parts, dtrs:4-940s running








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    B230 Aftermarket Head Gasket, Elring or Victor Reinz? 900 1993

    had reinz rubber gaskets fail on me, so i stick with elring or goetze. the actual head gasket from victor may be ok, it's just i've issues with the rubber seals, etc. from them. good luck, chuck.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    B230 Aftermarket Head Gasket, Elring or Victor Reinz? 900 1993

    Either is good enough. I'm using Reinz by the way. The B230 doesn't have much problems with head gaskets, more so if its naturally aspirated.

    Amarin.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.