Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2012 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

rebuilding SU airfilters 120-130 1967

posted by  riverbend on  Tue Mar 12 16:52 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

What are you using as a spacer on the stud that is right up against the filter element (so the tightening the nuts doesn't crush the filter) ? I'm using NAPA 6641 filters.

Thanks

Greg







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    rebuilding SU airfilters 120-130 1967

    posted by  vazquez on  Tue May 21 07:04 CST 2019
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 10 08:51 CST 2014
    [RELATED]

    Checked out the price of those Napa 6641 filters $19.41. YIKES!!!!!

    I bought my filters from Carquest that were for the 65 Pontiac Tri Power and the two cost me about 8 bucks,,, 4 each. And they fit perfect the old SU filter ends.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    rebuilding SU airfilters 120-130 1967

    posted by  MrV on  Wed Mar 13 14:22 CST 2019
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    I cut some 3/8" (I think) round steel tubing. Available at home depot.

    Dean








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      rebuilding SU airfilters 120-130 1967

      posted by  votx on  Wed Mar 13 17:59 CST 2019
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Thu Oct 23 18:48 CST 2014
      [RELATED]

      Back when I was making & selling the conversion kits for the SU carbs, I used !/2' OD aluminum tubing, which had approx. 3/8" ID, which was a nice fit over the 5/16" bolts.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.