Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Door Clips: Would these be compatible? 444-544

posted by  someone claiming to be tommyt544 on  Sun Dec 9 16:30 CST 2018 [RELATED]

Trying to find an affordable solution to some rusted door clips. Do these look like an accurate replacement?

https://www.ebay.com/itm/50-Door-Panel-Clips-Volvo-Volkswagen-/351199503474?vxp=mtr&hash=item51c51f2472








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Door Clips: Would these be compatible? 444-544

    posted by  Zkoop on  Tue Dec 11 00:53 CST 2018
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    I didn't go to the web site but I have used Auveco clips, their part number is 13173, listed for both VW and Volvo. The nose of the clip is 1/8" shorter than the original Volvo clip but if your panel hole pattern is accurate, they should work just fine. I struggled with them on the rear panels and ended up using old Volvo clips.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Door Clips: Would these be compatible? 444-544

      posted by  someone claiming to be tommyt544 on  Tue Dec 11 09:43 CST 2018 [RELATED]

      These do look comparable to both the original and the ones I posted. Thanks! (and cheaper!)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.