Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2017 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

rear brake shims 900

I'm putting new brake pads on my '94 940, it's an ATE caliper and pads (live rear axis), and the old ones came with 4 shims, 2 stainless, 2 coated, on each caliper. I checked the manual, that's exactly what it specifies, adding that "in the future" the shim design may be dropped in favor of pads with anti-squeal coating (I think Bosch pads may be of the "newer" design). I've got a set of new ATE pads (metal back) and 4 stainless shims from FCP (didn't realize that I'll need 8 to do both sides). I checked around, it doesn't appear that the coated shim is available, not even sure of the part number. Wonder if I'd be better off reusing old coated shims, or is it worth the wait to order a new set (the job can wait till next weekend, that's not a problem).
--
'98 V90 234K
'98 V90 157K
'94 940 NA 189K








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    rear brake shims 900

    Going to do same job with same pads on 1995 940 wagon. Plan on just using the stainless shims, really don't recall ever using 2 shims per pad and have not encountered any problems.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.