Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

544 camber adjustment 444-544

I have way to much negative camber on the right front and a little positive camber in left.
I removed the upper outer bushing grease fitting and loosened the pinch bolt, cleaned out the grease and tried numerous sizes of allen wrenches metric and std with no luck.

Apparently there is a special tool used to turn eccentric.

Would like to see a pic and is it easy to make a tool at home ??








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    544 camber adjustment 444-544

    Figured it out. There is an external 34mm nut to turn the eccentric. Just made one from some 1/8" steel stock.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      544 camber adjustment 444-544

      You can still buy the tool:

      http://www.skandix.de/en/spare-parts/accessories/garage/tools/tools-suspension-steering/tool-camber-adjustment-front-axle-sw-343/1059124/

      dean







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.