Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2005 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B18/M40 444 clutch linkage help needed 444-544

posted by  turtlejam on  Mon Oct 30 16:17 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

What do I do for clutch linkage for my 57 pv444?I put the B18/M40 out of my 62 pv544 in it.Do I need clutch linkage from the 444 a 544,or a combination of both?If parts need modified or fabricated I appreciate any and all details,thanks.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    B18/M40 444 clutch linkage help needed 444-544

    posted by  Duettguy on  Tue Oct 31 11:05 CST 2017
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    It's been a long while but as near as I recall, I pretty much used 544 on the inner and stayed with 445 on the outer. I found some source, I think it may have bee VP or CVI, for a hanger that bolted to the frame for the inner bushing. They also supplied the cross shaft and replacements for the worn pedal link and push rod. Pretty much a bolt up operation. Someone, I think maybe volvorelix, had a very neat setup involving heim joints to replace the various wear points.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.