Hello all, I managed to lose the 5 bolts that hold the front splash pan/skid plate on. Anyone have a set they want to sell? Will pay for shipping and the bolts of course. Really don't have the time or desire to go to the wrecking yard. Thanks :). Email is amlafrance1918@yahoo.com

I agree, they're not hard to find locally.

However, the local hardware store may not have capscrews with the integtral outsize washer. This may not be essential but I find it desirable. I believe the original screws were of this variety. I would look for M6 fender washers as well as the screws. I have seen those available at places like Home Depot but you may have to buy a package with more than you need.

Also, make sure the screw are fully threaded.


--
'80 DL 2 door, '89 DL Wagon

My hardware-store M6 bolts with separate washers are in year 19 of their beta test, fwiw.
--
82 242 6.2L coming...; '15 Honda Fit; '16 Subie X-Trek

That's what I use, too. Stainless. Once the original hardware loses its plating, it can seize to the weldnut in the crossmember, I guess, but only during the previous owner's watch. Some belly pans have less than 7 attachment points on our cars. I've looked for stainless hardware with captive washers, but not hard enough...
--
Art Benstein near Baltimore

When you are dissatisfied and would like to go back to youth, think of Algebra.

Hardware store? Nothing special about those bolts....pretty sure they're M6 15-20mm long.