Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2004 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Clutch 900 1994

posted by  Jackleedom on  Sun Apr 2 17:27 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Can the stock 8.5" clutch paired with the flat flywheel handle power around 200hp, and a greater torque without slipping.

M46 tranny (1986)
1994 b230ft
Flat flywheel (NOT DOG DISH)
13c
no performance enhancements yet.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Clutch 900 1994

    posted by  jwalker on  Mon Apr 3 07:24 CST 2017
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Jun 6 08:39 CST 2014
    [RELATED]

    I'm assuming you are putting an M46 into a 94 940.

    Looks like the standard clutch is used on both a NA and turbo 240 according to the FCP link below so it will probably work. You could also try the Turbobricks website. One of those guys might be able to point you in the direction of a heavier duty clutch if that's would you would like to do...

    https://www.fcpeuro.com/Volvo-parts/244/Clutch?year=1985&e=876&m=67&page=1






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.