Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AIrbox Hot Air Damper Seal 200

posted by  RicoS on  Sat Mar 4 13:55 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 02:18 CST 2014
[RELATED]

I pulled the airbox on a'93 240 in order to check the hot air thermostat. The thermo was OK, but I popped in a new one anyway, how long can one possibly last?

While in the airbox, I noticed the air damper seal was queefed out. Can anyone recommend a suitable, readily available material from which to carve a new one?

I know I might be able to get a seal from Volvo, but that would be at least one week away, even if all the planets fall into alignment. Also, McMaster-Carr probably has something usable hiding in their catalog, but I would like something here and now so that I do not have to suffer the PITA of buttoning it up just until the parts arrive.

Any possible sources for a gas-resistant, closed-cell foam would be appreciated.

If I can't source something locally, I might go with some 1/8" thick felt I have on hand.

Rich (near The Burgh)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AIrbox Hot Air Damper Seal [200]
posted by  RicoS  on Sat Mar 4 13:55 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.