Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2004 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

How to open bonnet when pull cable won't 700 1990

Hood is latched shut. Pull cable at driver's knee doesn't release it.
Grill is in place, not removable 'til hood is open.
Shield/pan is attached under engine, easy enough to remove but I don't see anything to get to from under.
Somebody has got to have solved this before!?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

How to open bonnet when pull cable won't 700 1990

Do you think that the cable is broken?

If not, try having someone press down on the hood and release a few times while you pull on the release.

If that doesn't work, go where you should have in the first place, read the FAQ.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

How to open bonnet when pull cable won't 700 1990

OK, didn't think to look in FAQ for this simple thing. I'll try the helper push too. THX.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to open bonnet when pull cable won't 700 1990

Yeah, what it says in the FAQ and also search the forum. It happened to me a long time ago, but I think I finally got it to open by pounding on the front of the hood. In my case the cable was okay but the sliding parts were gummed up. Once you habe ot open, go at the openings with WD-40.
--
1992 745, >500k km (now gone, but not forgotten)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.