Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2012 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear Poily bushing - Pre-Load or Not? That is the question... 200 1991

uid 33936's pic
posted by  TheBrickTank on  Tue Oct 25 12:37 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

Sages,

About to put the rear end back together in my project car with all new poly bushings and Bilstien heavy duty shocks.

So, since these are poly bushing, do I pre-load the suspension while torquing everything or not?

Thanks in advance,

Matt








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Poily bushing - Pre-Load or Not? That is the question... 200 1991

posted by  pageda on  Tue Oct 25 12:44 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

There is no need to preload the poly bushings.
Dan







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear Poily bushing - Pre-Load or Not? That is the question... 200 1991

uid 33936's pic
posted by  TheBrickTank on  Tue Oct 25 12:51 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:54 CST 2014
[RELATED]

Your the man Norton!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.