Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Does this hole in the cylinder head belong there? 900 1994

posted by  rwlms on  Mon Oct 17 15:30 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 6 08:20 CST 2011
[RELATED]

After removing a leaking cam seal I noticed two things. 1) a half dozen small metal shavings behind the seal and 2) a rather jagged hole under the cam, which you can see circled in the photo at http://rwlms.com/B230F-cam-front.jpg.

I'm no ace mechanic, so I've got to ask: Is that hole supposed to be there? Doesn't exactly look like a Volvo precision cut. And the metal shavings? Could they be leftovers from the manufacturing process? Engine has about 150k miles.

Thanks!

Roger






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Does this hole in the cylinder head belong there? [900][1994]
posted by  rwlms  on Mon Oct 17 15:30 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.