Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

broken arm on drivers window 200 1992

posted by  riverbend on  Sat Apr 16 17:31 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

this car has power windows and when I got it the arm between the large quadrant gear and the window 'carriage' was broken. I welded it up, greased everything that moved and all was good. Recently it broke again.

The window moves freely and the only thing that I can see wrong is that the weather strip at the top of the window is rolled into the channel. Is that enough to cause a problem ? Alternatively, if the quadrant is not stopping against the stop block is it a case of the irresistable force meets the immoveable object ?

Thanks

Greg







  REPLY TO THIS MESSAGE    PRINT   SAVE 

broken arm on drivers window 200 1992

posted by  Redwood Chair on  Sat Apr 16 20:49 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Feb 25 21:29 CST 2014
[RELATED]

You're supposed to loosen the mounting bolts a little and run the window up and down a couple times so the regulator finds it's most comfortable position.

If your felted rubber window guides are blown out that's another issue in and of itself.
--
71-145-S ; 82 245GLT ; 72-1800-ES







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.